- Open Access
Assessing particle and fiber toxicology in the respiratory system: the stereology toolbox
Particle and Fibre Toxicology volume 12, Article number: 35 (2015)
The inhalation of airborne particles can lead to pathological changes in the respiratory tract. For this reason, toxicology studies on effects of inhalable particles and fibers often include an assessment of histopathological alterations in the upper respiratory tract, the trachea and/or the lungs. Conventional pathological evaluations are usually performed by scoring histological lesions in order to obtain “quantitative” information and an estimation of the severity of the lesion. This approach not only comprises a potential subjective bias, depending on the examiner’s judgment, but also conveys the risk that mild alterations escape the investigator’s eye. The most accurate way of obtaining unbiased quantitative information about three-dimensional (3D) features of tissues, cells, or organelles from two-dimensional physical or optical sections is by means of stereology, the gold standard of image-based morphometry. Nevertheless, it can be challenging to express histopathological changes by morphometric parameters such as volume, surface, length or number only. In this review we therefore provide an overview on different histopathological lesions in the respiratory tract associated with particle and fiber toxicology and on how to apply stereological methods in order to correctly quantify and interpret histological lesions in the respiratory tract. The article further aims at pointing out common pitfalls in quantitative histopathology and at providing some suggestions on how respiratory toxicology can be improved by stereology. Thus, we hope that this article will stimulate scientists in particle and fiber toxicology research to implement stereological techniques in their studies, thereby promoting an unbiased 3D assessment of pathological lesions associated with particle exposure.
The inhalation of harmful particles can lead to adverse health effects and pathological changes in the respiratory tract. Most often noxious inhaled particles trigger a pulmonary inflammatory response which can initiate the development of sub-chronic or chronic pulmonary diseases including pneumonitis, silicosis, asbestosis, chronic obstructive pulmonary disease (COPD), emphysema, asthma, fibrosis or cancer . The characteristics and severity of particle and fiber-induced pathology depend on exposure time and concentration as well as on particle characteristics such as chemical composition, size, structure and surface composition [2–4]. However, the source and composition of airborne particles is vast - including for example combustion derived particles from traffic and industry, cigarette smoke, silica dust, welding fumes, asbestos, biological particles such as pollen and fungi as well as engineered nanomaterials of various compositions. By dealing with the investigation of multiple physical, chemical and biological parameters at the same time, particle and fiber toxicology becomes a challenging field. Research on respiratory particle toxicology and risk assessment therefore attempts not only to investigate effects of individual particles and sources, but also effects of particle characteristics in general such as shape, size and composition in order to promote predictability of newly generated particles . This is of particular need with the quickly emerging field of nanotechnology and the constant development of new nanoparticles (NP;<100 nm in all three dimensions, ISO/TS 27687:2008) with unknown effects.
Whereas in vitro tests are helpful for quick toxicity screening, long term effects in the respiratory tract are usually only assessed by in vivo toxicology studies. In vivo respiratory toxicology studies also include the histopathological analysis of the lungs to investigate adverse effects of particles. The severity of histopathological lesions indicates the extent of particle toxicity and the type of lesions provide insight into the potential mode of action. Quantitative measurements of histopathological changes in the lungs furthermore enable the calculation of dose–response curves for particle toxicity estimation in risk assessment. Conventional analysis of histopathological lesions usually includes a scoring of the tissue lesion by one or more experienced observers, ideally blinded to the identity of the study group. However, comparative studies have shown that these evaluations are prone to an interpersonal variation with a potential bias [6, 7]. In addition, the degree of alterations has to be large enough to be caught by the investigator’s eye. An accurate way of obtaining quantitative information from histological sections is by the use of stereology. This is an unbiased approach for the quantification of histological structures such as volume, surface area, length and number and has become the gold standard for quantitative microscopy in the respiratory tract . The term stereology is derived from the Greek “stereos” which means spatial and, as a branch of stochastic geometry, the approach is based on solid mathematics . In comparison to other forms of microscopic morphometry – the direct measurement from two dimensional (2D) sections - stereology enables the quantification of the three-dimensional (3D) characteristics of organs, tissues, cells or organelles based on measurements on 2D sections. This is achieved by i) ensuring that each part of the organ has an equal chance of becoming part of the analysis and by ii) applying appropriate test systems/probes to randomly sampled fields of view (see following chapters). The interactions between the structures and the test systems generate counting events that – inserted into the corresponding stereological equations – provide relative values of volume, surface area, length or number of biological structures. By multiplication with the reference volume (e.g. lung volume), total values are attained which are the basis for rigorous statistical testing. This means that in comparison to routine histopathology where only 1–2 tissue sections are analyzed, a larger number of randomly selected lung tissue sections is included in the evaluation (see section for lung stereology below). Thus, this procedure ensures an unbiased and efficient quantitative analysis of the respiratory tract.
Traditionally, lung stereology was developed and applied to assess the structure and function relationships of the lungs [10–12], however, modern experimental morphology and histopathology equally benefit from this unbiased approach [13, 14]. Guidelines to use quantitative histopathology as a biomarker in qualification studies as well as in risk assessment for occupational and environmental health regulations point to the need of unbiased data acquisition, hence stereology for morphometry [15–17]. This review aims at providing an overview of different stereological techniques which can be used to evaluate the severity of respiratory histopathology in particle and fiber toxicology.
Pathology of pulmonary particle exposure
The pathology of particle and fiber toxicology in the respiratory tract depends on the exposure source, concentration, duration and individual predisposition. Acute responses to particle exposures often include pulmonary inflammation . Various kinds of particle were reported to induce an inflammatory response as for example combustion-derived particles - including diesel exhaust particles  and ultrafine particles (< 0.1 μm in aerodynamic diameter) , engineered NP such as carbon nanotubes, TiO2 or Ag NPs [21–23] as well as silica  or asbestos . Chronic particle exposure and long term effects may include the development of chronic obstructive pulmonary disease (COPD) [26–28], allergic airway inflammation [29–34], fibrosis [35–38] or neoplasms [39–41]. In addition, recent studies have also addressed mixed exposures; for example the potential of airborne particles to act as an adjuvant in the development of allergic airway disease or the effect of ozone with combustion derived particles as in the environment [42–46]. Mixture studies include another important aspect of inhalation toxicology which will most likely expand in the future. Table 1 and the following paragraphs give a brief overview on lung pathologies related to particle exposure and how they could be quantified by means of stereology.
The extent of pulmonary inflammation and tissue damage can be well addressed via pulmonary histopathology, and different inflammatory parameters can be measured by stereology, including cellular or structural changes. Cellular changes may include the influx of pro-inflammatory cells such as neutrophils and macrophages as well as cellular proliferation or apoptosis. Severe inflammation leads to damage of epithelial or endothelial cells and the exudation of edema fluid to the peri-bronchovascular or alveolar septal interstitium as well as into the alveolar lumen. Stereological parameters which can be used to quantify pulmonary inflammation may include the numbers of inflammatory/proliferating/apoptotic cells, the volume of pulmonary edema or surface area of damaged epithelium/endothelium .
Asthma/allergic airway disease
The pathology of asthma or allergic airway disease is characterized by airway hyper-responsiveness, reversible airway obstruction, infiltration of eosinophils and CD4+ T helper type 2 cells and airway remodeling . Structural changes like infiltration of inflammatory cells and airway remodeling, which may include mucous cell metaplasia, increased smooth muscle mass or sub-epithelial fibrosis, serve as measures of pathological severity of asthma and can be stereologically quantified as cellular numbers, epithelial thickness, the volume of mucus in epithelial cells or the volume of muscle mass and fibrosis [13, 48].
The development of COPD is usually triggered by continuous irritation of the lungs resulting in chronic inflammation and airway remodeling, which lead to the development of obstructive bronchiolitis and emphysema . Emphysema is characterized by a distal airspace enlargement and a loss of alveoli and alveolar surface area, which can be assessed by stereological quantification of alveolar number and surface area and/or number-weighted and volume-weighted mean alveolar volume [13, 49, 50]. Obstructive bronchiolitis is assessed in a similar manner to airway obstruction in allergic airway disease.
Pulmonary fibrosis is characterized by inflammatory cell infiltration, alveolar epithelial cell injury, fibroblast hyperplasia, collagen deposition and scar formation [51, 52]. Lung fibrosis can be analyzed by quantitative histopathology at light or electron microscopic levels: At light microscopic level for example the volume of nonfunctional parenchyma (collapsed or already remodeled) versus the volume of ventilated parenchyma can be estimated , or the volume of parenchymal collagen stained with picrosirius red . At electron microscopic level the thickening of the air-blood barrier can be investigated or the volume of various septal compartments such as collagen, extracellular matrix or fibroblasts [13, 54, 55].
Assessment of quantitative lung histopathology can help to quantify parameters relevant to tumor development such as the number of proliferative cells, the number or volume of cells staining positive for tumor cell markers or the volume or number of metastatic nodules and carcinomas.
The main problem in quantitative histopathology is that tissue sections for microscopic analysis are i) only representing a very small fraction of the whole organ and are ii) more or less 2D. In comparison to other forms of morphometry, which encompasses the direct on-section 2D measurement of structures, design-based stereology takes into consideration the 3D structures of organs, tissues and cells . In order to obtain i) representative information on the whole lung and not only on a single histological section, it is important to give each part of the lung an equal chance of being sampled. Smaller sections from different parts of the lungs are therefore being sampled by an appropriate sampling regime such as systematic uniform random sampling (SURS) as shown in Fig. 1. In order to ii) correct for the loss of one dimension (3D→2D) appropriate test systems are used as shown in Fig. 2. Stereological estimates of parameters such as number, length, surface or volume of the structure of interest are first calculated as densities within their sampling space and multiplied in the end with the volume of the reference space - usually the total lung volume - to obtain total numbers, length, surface area or volume per lung. For these reasons it is very important to be aware that stereological quantification already starts with the collection and sampling of the whole lung.
Lung sampling for stereology
For stereological analysis, the lungs should be collected and preserved under a controlled inflation pressure (Fig. 1a). Uncontrolled lung inflation pressure during lung fixation can affect the preservation of lung structures and the final lung volume, which are essential for stereological quantification. Sampling and fixation of the lungs is therefore recommended by either inflation fixation via the trachea with fixative application under a defined pressure (recommended pressure 20–25 cm of H2O) or by vascular perfusion fixation of an inflated lung under controlled pressure. Generally, inflation fixation is easier to perform and well suited for the estimation of many parenchymal parameters. However, perfusion fixation is better suited for the estimation of vascular and intra-alveolar parameters, including measurements of intra-alveolar edema. In particular, analysis of particle deposition and distribution in the airways and the alveolar lining layer requires the use of fixation by perfusion to ensure that particles can be visualized where they have been deposited. The choice of fixatives such as paraformaldehyde or glutaraldehyde depends on the final method of analysis: If samples are prepared for transmission electron microscopy (TEM), a strong fixative mixture with 1–3% glutaraldehyde is recommended, but for immunohistochemistry, a weaker fixative containing 1–4% paraformaldehyde is suggested. Further information on fixation techniques and embedding methods of choice can be found in [57, 58].
The total lung volume - which represents the reference space in most cases - can be estimated either by the Archimedes’ principle (Fig. 1b) or by the Cavalieri method. For the volume measurement with the Archimedes’ principle, the lungs are immersed in a glass of water until completely covered with water, but not touching the glass (buoyancy). The displaced volume of water equals the volume of the lung and can be estimated by measuring the weight of the displaced water . The Cavalieri method  can easily be incorporated during the sampling of the lung (Fig. 1c and d) as described below.
After estimating the lung volume, tissue sections of the lungs are being sampled. As mentioned before, it is important that each part of the lung has an equal probability of being sampled. This guarantees that all data are gathered from a representative sample of the whole lung. Theoretically it is therefore possible to chop the lungs into random pieces of a desired size and independently select a desired number of tissue blocks. However, it has been shown that systematic uniform random sampling (SURS) is more efficient than independent random sampling [61, 62]. Thereby, the lungs are continuously sectioned into slices of approximately the same thickness. The starting point of the first cut is chosen randomly. This ensures the randomness of the sampling. In a next step, a subsampling with a constant sampling interval, as shown in Fig. 1d, is done by including every 2nd, 3rd, 4th or nth slice into the evaluation and again the first slice is chosen randomly. The choice of subsampling depends on the lung size (species specific) and the microscopic embedding technique (LM or TEM). Hence more subsampling steps are needed for TEM sampling or large lungs, whereas tissue sampling of small lungs (e.g. mice lungs) at LM level might not require any subsampling at all. As a rule of thumb an approximate number of 10 tissue slices is recommended for an unbiased analysis . However, more important than a precise number of tissue sections is that the variation introduced by a number of tissue sections is not greater than among biological individuals. This principle of accuracy versus precision is further discussed in the section on stereological quantification. Random choices can be made simply by throwing a dice, using a random number table or a computer software. The subsampling procedure can be repeated several times, as shown in Fig. 1e and f, until the tissue pieces have the desired size for embedding. In addition to the random selection, the lung samples should also have a random orientation. The lung is an anisotropic organ, meaning that certain lung structures as for example the bronchial tree have a particular spatial orientation. Whereas number and volume estimation are not affected by the anisotropy of the lung, the orientation is critical for the estimation of surface area and length parameters - particularly estimations of the conducting airways and the pulmonary vasculature. Other pulmonary structures such as the parenchyma have no particular spatial orientation and can be regarded as isotropic. In order to avoid any bias due to selective tissue orientation, isotropic uniform random (IUR) orientation is performed at least once during the sampling process in all three axes. This can be done during tissue embedding with the isector  or prior to lung sectioning with the orientator . Further details on sampling techniques and systematic uniform random sampling are provided in .
Sampling, embedding and sectioning of the lungs for microscopic analysis is followed by the structural measurement. At this point, the three dimensional structure is more or less reduced to a plane, two dimensional section. This means that all structures are reduced by one dimension: a volume is displayed as an area (3D → 2D), an area as a length (2D→1D), a length as a transect (1D→0D) and the zero-dimensional characteristic of a structural number disappears, that means it is not represented in 2D (see Table 2). The principle of stereology takes the loss of dimension into consideration and recovers information on the lost dimension by applying appropriate test probes to the 2D sections. During this process all measurements are expressed as relative values, the so-called densities. Density values are not affected by the loss of one dimension and for example a volume of interest per reference volume in 3D, equals the density of the resulting area of interest per reference area in 2D i.e. mm2/mm2 = mm3/mm3 = 1. The same is true for surface area densities or lengths within test fields, i.e. mm/mm2 = mm2/mm3 = mm−1 and length densities or transects within test fields, i.e. 1/mm2 = mm/mm3 = mm−2. Upon multiplication with the reference volume (mm3), the densities result in volume, surface area or length per lung (Table 2).
As during tissue sampling, it is important that the microscopic fields of view (or images) for the evaluation are chosen randomly. An effective way to ensure this is by applying the principle of SURS. This can easily be done manually by choosing a random starting point outside the sample, followed by step wise left/right and up/down navigation in x and y direction; a so-called meander sampling. It is thereby important that fields of view are strictly selected by chance. Anything like searching for “the greatest lesion” or “best looking area” will create a bias and will jeopardize the scientific value of the study. For light microscopy, there are computer-assisted programs available to perform a random image acquisition.
To ensure an efficient and simple counting procedure, plain geometrical probes are applied such as points, lines or areas. The application of the geometrical probes is displayed in Fig. 2. The general rule for the correct choice of the test probe is that the sum of the dimensions of the structural parameter and the test probe equals three or more, hence suggesting a point grid for volume, test lines for area, a test plane for length and a test volume for number estimation. The latter can be generated by using two thin physical sections or two optical planes from a thick single section, an approach called disector  which is explained in more detail in Examples V and VI. The geometrical probes are superimposed over the acquired microscopic images. This can also be done digitally with stereology programs like the STEPanizer  or manually by generating a transparent foil with the geometrical probe prints which is directly placed on the captured images. The interaction of the geometrical probe with the structure of interest generates a counting event as shown in Fig. 2. The number of counting events is proportional to the “amount” of the structure and the density of the test probe and by knowing the exact dimensions of the geometrical probes, the densities can be calculated as described in Table 2.
Beyond accuracy/unbiasedness, efficiency is also an aim of stereology. Efficiency means that the precision of the data should be balanced between the amount of work (and at which level of the analysis to invest what amount of work) that is needed to gather the data and the precision that is actually needed for the purpose of the study. In order to keep the evaluation efficient it is important to balance the number of tissue blocks, images and counting events in the evaluation. In general it is recommended to generate a total of 100 to 200 counting events per structure of interest from 10 to 15 sections to have a 5–10% coefficient of error . The coefficient of error can be reduced by including a greater number of images in the evaluation or by increasing the density of the test probe, but most of the time it is recommended to include more tissue blocks per lung or lungs per experiment in the evaluation instead. This is reflected by the “Do more less well”- principle (quote by E.R. Weibel, see ): it is much more efficient to increase the number of organs or tissue blocks and put less effort into investigating each field of view. The choice of an ideal setup depends on the frequency, distribution and size of the structure of interest. For example, for the quantification of a large, but rare lung lesion, it is recommended to sample more images from several tissue blocks and combine these with a coarse test probe set, rather than using few images with a dense test probe set. The setup of the test system therefore varies from case to case and needs to be designed for the purpose of the current study. It is also worth considering at which level of sampling the largest variation occurs and increasing the sampling at this particular level; e.g. with a high inter-individual variation it is better to increase the number of study subjects or with an irregular lung lesion the number of tissue blocks etc. Details on how to calculate the coefficient of error for a stereological setup can further be found in [14, 63, 70].
Furthermore, it is worth considering that the deposition and distribution of inhaled particles in the lung depend on particle size and characteristics  and do not necessarily follow a random distribution. Non-random particle deposition could lead to site-specific lung lesions [72, 73]. A small pilot study for qualitative characterization of the lung lesions is therefore recommended prior to setting up the stereological study design. With site-specific lung lesions, whole lung SURS, although unbiased, might not be the most efficient approach. Other sampling strategies are therefore recommended for heterogeneous lesions depending on the distribution of the lesion (see Fig. 3). Two methods which are well suited to deal with site-specific lung lesions in stereology without jeopardizing an unbiased histopathological quantification are stratified sampling  or the proportionator [74, 75]. The principle of stratified sampling includes a step of subdivision into different “strata” or compartments of the lung. Each compartment is then sampled by SURS and evaluated according to its content. Thereby the sampling efficiency in a specific compartment can be enhanced and the evaluation related to a specific compartment of interest. The proportionator is another elegant approach which combines conventional stereology with automatic image analysis and can be applied for quantifying site-specific lesions with an inhomogeneous distribution within the lung. The proportionator operates at the level of image sampling for stereological quantification by automatically selecting a structure of interest - for example a specific cell type stained with IHC - in proportion to its occurrence. The quantification efficiency is increased by a proportional oversampling of the structure of interest, with known probability, thus an unbiased quantification is still maintained by correcting for the known oversampling. In comparison to conventional stereology, the proportionator requires digitalization of histological slides and suitable software for automatic image analysis. Further literature on the theory and application of the proportionator can be found in [74–76].
Depending on the histopathological structure of interest, various stereological strategies can be applied to quantify particle induced lesions. Some examples could be a) volume of the whole lung, the parenchyma, fibrotic tissue or specific cells, b) surface area of alveolar epithelium and capillary endothelium, c) mean thickness of alveolar septa or tracheobronchial epithelium and d) number of inflammatory cells or alveoli. Selected examples (Figs. 4 and 5) with calculations (Table 3) are demonstrated in the following section. Further detailed examples and calculations can be found in .
Example I: Lung volume by the Cavalieri method
An example for the use of test points to estimate a volume is the Cavalieri method for the estimation of the reference volume: After sectioning of the lung into slices of roughly the same thickness, all lung slices are placed laterally with the same orientation. A point grid with a defined area represented by each point (a/p) is randomly placed on the lung slices and the points hitting the cut surface of the lung sections are counted (Fig. 4a). The total number of point counts on the lung tissue (P) is multiplied with the area per point and the section thickness (d). The multiplication results in the total lung volume (V(lung)) as shown in eq. 1:
Example II: Parenchymal volume
The lung parenchyma represents the gas exchanging region of the lung, including alveolar airspace and the capillary containing septa. Especially chronic exposure to harmful particles and fibers can lead to severe changes in the lung parenchyma including fibrosis or emphysema. The value of parenchymal volume itself does not provide sufficient information to characterize and quantify parenchymal lesions, but it may be used as a reasonable first impression of the extent of the lesions, particularly when it is combined with other estimates such as alveolar surface area or alveolar number. The lung parenchymal volume is best quantified at a lower magnification such as 5x or 10x. After SURS image acquisition, a point grid is superimposed over the images and all points on the parenchyma (P(par)) and non-parenchyma (P(nonpar)) are counted. The volume of the parenchyma is then calculated by dividing the number of points hitting the parenchyma by the number of points hitting the reference volume (P(lung)) and multiplied by the total lung volume as shown in eq. 2. Since the ratio of parenchyma versus non-parenchyma is around 9:1 it is recommended to use a coarse and a fine counting grid to attain 100–200 counting events each and to keep the workload reasonable. A double test system combining a coarse and a fine point grid as shown in Fig. 4b, can be used for this purpose. Hereby all coarse points on the parenchyma and all fine points on the non-parenchyma will be counted at the same time. However, it is important to keep the ratio of coarse to fine points in mind and multiply the coarse points with the inverse ratio before including them in eq. 2. The same principle of volume estimation can be applied for the quantification of other structures as, for example the parenchymal collagen in fibrotic lungs or the alveolar airspace in lung emphysema.
Surface area and volume estimation
Example III: Alveolar volume and surface area
The total alveolar surface area gives an estimate of the functional gas exchange area and is measured with test lines. At the same time as the alveolar surface area, the alveolar airway volume, the septal volume and the mean septal thickness can be estimated. The latter can directly be derived from septal volume and surface area [77, 78] and could be a measure of alveolar septal thickening as occurring in interstitial lung diseases. A SURS image sampling at a 20x magnification is recommended for this evaluation. A test line system, as displayed in Fig. 4c, is superimposed and the intersections (I) of the test line segments with the alveolar septa are counted as well as the number of line endpoints - which serve in this case as a point grid - on the alveolar lumen (P(alv)) and on the septa (P(sept)). The total alveolar airspace volume is calculated by dividing the number of points hitting alveolar airspace by the total number of points hitting the parenchymal reference area (∑(P(alv) + P(sept)) and multiplying the result with the parenchymal lung volume as described above. The surface density of alveolar septa (SV(sept/par)) is calculated by relating the total number of intersections of the test lines with alveolar septa to the total number of points hitting the reference volume and to the length of test line associated with each point of the test system (l/p) as shown in eq. 3. If only one of the line end points is used for point counting, l/p equals the length of an individual test line segment. The total septal surface area (S(sept,lung)) is calculated by multiplying SV(sept/par) with V(par) as in eq. 4.
The mean septal thickness (τ(sept)) can be calculated from the septal volume density (VV(sept/par)) and the septal surface density (SV(sept/par)) according to eq. 5.
Example IV: Epithelial mucous cell metaplasia
Various studies have shown that combustion-derived particles and nanoparticles can act as adjuvants in the development of allergic airway disease [30, 33, 42]. A histopathological feature of allergic airway disease in different species is epithelial mucous cell metaplasia  and the quantification of mucous cell metaplasia can serve as a measure in the assessment of the adjuvant potential of particles in allergy development [33, 42]. The mucosubstance in broncho-epithelial cells can be quantified per lung as well as per basement membrane of broncho-epithelial cells, where the basement membrane serves as an internal reference measure [80, 81]. A SURS image acquisition is recommended at 20x magnification. Since the conducting airways are part of the non-parenchymal fraction of the lung, which is much smaller than the parenchymal fraction, a more rigorous image sampling of 150 to 200 images might be required or alternatively the application of the proportionator . For the analysis, a line test probe is superimposed over the images (Fig. 4d). All intersections (I) with the bronchial epithelial basement membrane are counted as well as all line endpoints hitting the epithelium (P(epi)), the intracellular mucosubstance (P(muc)) and on the lung tissue (P(lung)). A coarse sub-sampling as shown in Fig. 4d is recommended for counting the lung points, to maintain the evaluation efficient. If doing so, the counted lung points need to be multiplied by the inverse sub-sampling fraction in order to obtain the total lung points (ΣP(lung)). The mucus density (VV(muc/lung)) is calculated by dividing all points hitting the mucus by the reference points (ΣP(lung)) as shown in eq. 6. The surface density of the epithelial basement membrane (SV(bm/lung)) is estimated as shown in eq. 7 and the volume of mucus per unit surface area of basement membrane V/S(muc/bm) is calculated as shown in eq. 8.
The mean thickness of airway epithelium (τ(epi)) – a measure of epithelial hyperplasia and hypertrophy - can furthermore be calculated by dividing the volume density of epithelial cells by the surface density of the basement membrane as shown in eq. 9.
Number estimation with the disector
Number estimation can be used to quantify discrete objects or “particles” such as cells or alveoli. As mentioned before, each structure is reduced by one dimension in a 2D microscopic section and a discrete object is not represented/countable any more in a thin single section. In order to compensate for the loss of dimension, a disector pair is used, consisting of two (usually consecutive) sections with a known distance height (h) [67, 82]. These sections can either be generated from two thin physical sections (physical disector) or optical sections (from z-stack images; optical disector). The latter might be obtained by focusing and imaging through one thick light microscopic section  or by selecting optical sections from a 3D tomography . Particularly laser scanning microscopy (LSM) is very well suited for the application of the optical disector, since image z-stacks naturally generate multiple disector pairs [83, 85]. Thereby, a volume will be recreated – which is the volume between the surface of the first and the surface of the second section. As discrete objects with an easy and regular surface topology (such as cells or nuclei) have only one beginning or end in vertical height, the number of tops or bottoms contained in the volume between the two sections is proportional to the number of objects within a unit of the reference volume. The criterion to count an object in a disector is that it is present in one section (reference section) but not in the other section (look-up section). The distance between the two sections of a disector – the disector height - should be roughly one third of the average object size and not larger than the smallest particles, otherwise the object may be lost between the two sections. The volume reconstruction for object counting requires the knowledge of the distance (h) between the two sections and an area wherein the objects are counted. The counting area is specified by an unbiased counting frame  of a known area (A) and only cells within the frame are part of the evaluation. To avoid any over- or under-sampling in the test field area, the unbiased counting frame consists of two inclusion and two exclusion lines and their extensions (green and red in Fig. 4a and b, respectively). Any cells touching the exclusion line are omitted from the evaluation whereas the cells touching the inclusion line are counted. Further theoretical and practical details on the disector can be found in [13, 63, 67].
Example V: BrdU positive cell counts
An application of the disector is the estimation of the number of particular cells of interest in the lung. Especially the number of inflammatory cells could be useful for analyzing the effects of particle and fiber exposure. Another potentially relevant example is the quantification of proliferative cells as a result of injury and repair which can be visualized by Bromodesoxyuridine (BrdU) application and immunohistochemistry . Figure 5a shows a disector pair of lung parenchyma stained for BrdU positive proliferative cells. The cells present in the reference section (Fig. 5a), but not in the look-up section (Fig. 5a’), are marked with arrows. Only the BrdU positive cells are counted which are not present in the look-up section (for example 5 counts in Fig. 5a and 3 counts in Fig. 5a’). The test field is specified by an unbiased counting frame  of a known area (A) and only cells within the frame are part of the evaluation. The red line of the counting frame marks the forbidden line and any cell in touch with the red line is excluded from the evaluation whereas the cells on the green line are included. The numerical cell density (NV(cell/lung)) is then calculated by dividing the number of counting events (Q−) by the number of evaluated test fields (n), the counting frame area (A) and the distance height between the disector pairs (h) as shown in eq. 10. The number of test fields (n) on the lung tissue can be estimated for example by counting all edges of the counting frame hitting the lung tissue and dividing the obtained counts by four.
If the cellular profiles are counted both ways (as shown in Fig. 5a) the resulting density needs to be further divided by two. The total number of BrdU positive cells in the lung is obtained by multiplying the numerical cell density by the total lung volume.
Example VI: Alveolar number
The loss of alveolar number is a measure for the development of emphysema as for example in cigarette smoke induced COPD . The estimation of the numerical density and the total number of alveoli in the lung can be achieved with the disector method. The alveolar number is estimated by counting the alveolar openings – which represents a single event per alveolus - at the level of the free septal edges, where they form a two-dimensional network . The alveolar network and number can further be estimated with the Euler number [88, 89]. The Euler number (χ) is obtained by subtracting “Bridges” (B) from “Islands” (I) and “Holes” (H) . A bridge is a structure which connects two alveolar septa and closes an open alveolus as shown in Fig. 5b. Islands and holes can be disregarded in the alveolar network. Note that bridges which touch the exclusion line or its extension are not included in the evaluation (Fig. 5b’ red arrow) but those touching the green inclusion line are part of the evaluation (Fig. 5b green arrow). The alveolar numerical density (NV(alv/lung)) is calculated by dividing the number of bridges (B) by the total test volume as described in Example V and shown in eq. 11. Again, if counts are performed both ways, the density needs to be divided by two. The total alveolar number per lung is obtained by multiplying the alveolar density number with the total lung volume (V(lung)). More information and details on the Euler connectivity in lung stereology can be found in [88, 89].
Particle deposition and uptake in lung cells
In addition to quantitative histopathology, stereology can also be applied to quantify particle distribution and uptake in lung cells or cell cultures [91–93]. To estimate the deposition and uptake of particles in the lung, the particle number or volume distribution within the lung, at organ, tissue, cellular or organelle level can be quantified by relating their occurrence within a specific compartment of interest to the volume of this compartment. This stereological approach is called relative deposition index . However, particles must be unambiguously identifiable in the tissue or cells by the microscopic techniques of choice . The microscopic technique of choice is dependent on particle characteristics and may include polarized LM, LSM, TEM or energy filtered TEM (reviewed in ). Some particle types may not be suited for microscopic quantification at all due to poor visualization and limited resolution capacities.
Challenges and pitfalls
It is important to note that unbiased stereological data can only result from unbiased data acquisition. Most pitfalls resulting in biased data acquisition occur during sample preparation, e.g. lung fixation, reference space measurement or tissue embedding and sectioning . Some pitfalls which require particular attention are listed below:
Controlled lung inflation: Uncontrolled inflation during the fixation of the lungs results in distortion of dimensions and hence biased quantification. To avoid such artifacts, the inflation pressure of the lung needs to be monitored during fixation - either by controlling the pressure of fixative application during inflation fixation or by monitoring the air and perfusion pressure in the lungs during perfusion fixation. The lungs might be immersed in fixative for a couple of hours or days till further processing to ensure complete fixation of the tissue. It is recommended to keep the preservation time in fixative constant within an experiment to avoid structural changes over time.
Measuring the reference space: A missing reference space or lung volume estimation furthermore eliminates the possibility of total lung structure measurements and only allows relative measurements. Interpretations based on ratio densities, without knowledge of changes in the reference space (the so-called reference trap) are frequent and can be misleading . It is therefore most important to never forget to measure the reference space.
Unbiased tissue sampling: An unbiased random sub-sampling of the lungs is crucial to ensure that every part of the lung has an equal chance of being sampled. Furthermore, it is important to keep in mind that surface and length estimations also require spatial random orientation. Random orientation in space can be acquired for example by the isector  or the orientator .
Tissue deformation: All quantitative parameters are distorted by tissue deformation. Certain fixatives and embedding media such as formalin fixation and paraffin embedding are prone to result in tissue shrinkage and deformation. There are different solutions to circumvent this problem such as using different fixatives and embedding media or monitoring the extent of shrinkage. Fixatives and resins as used in TEM embedding present less tissue shrinkage . However, certain stains and section preparations might not work on glutaraldehyde fixed and resin embedded samples. Alternatively it is recommended to monitor tissue shrinkage. This can be done by embedding a tissue piece of known dimensions and tracking the extent of shrinkage over the embedding and sectioning process. The percent of tissue shrinkage then needs to be corrected in the application of density calculations in all dimensions. Further information on the issue of tissue shrinking in stereological measurements can be found in .
Biopsies: Particularly in human lung pathology often only small biopsy samples are available. Lung biopsy samples require a special handling since they do not meet most criteria for lung stereology: biopsy sites are usually non-random, the tissue might be collapsed, tissue fixation and preparation might be compromised due to specific requirements for diagnostic analysis and the reference space is restricted to the biopsy and not the whole organ . All these constraints are a limitation for conducting unbiased stereology. However, some principles of stereological measurements can still be applied for relative structural quantification. Measurements can be performed by applying a suitable internal reference space and stereological test probes can be applied to quantify the structures of interest. Further details or examples on how to handle biopsies can be found in [99–101].
The severity and mode of action of noxious particles and fibers as well as other inhalative toxicants can be assessed with pulmonary histopathology. For this reason pulmonary histopathology serves as an important instrument in toxicity studies and for risk assessment. With the use of stereology, histopathological lesions can be quantified in an efficient, yet unbiased manner, allowing the creation of dose response curves and estimating effect levels based on lesions and pathologies. In combination with computer programs designed for stereology the quantification can be further facilitated. The current review aimed to provide an overview on different particle and fiber associated lung pathologies and how stereology can be implemented in their quantitative evaluation. The examples given serve as an illustration on how to approach stereology in respiratory toxicology, and common pitfalls in quantitative histopathology are discussed. We hope that this article will stimulate scientists in particle and fiber research to implement stereological techniques in their studies in order to improve the quality of morphometric quantification.
Area per point
Chronic obstructive pulmonary disease
Laser scanning microscope
Length per point
- LV :
- NV :
Particulate matter (<10 μm)
Count in 2D
- Q− :
Count in 3D(disector)
- SV :
Systematic uniform random sampling
Transmission electron microscope
- VV :
Hinkley GK, Roberts SM. Particle and Fiber Toxicology. In: Merkus HG, Meesters GMH, editors. Particulate Products: Tailoring Properties for Optimal Performance. Switzerland: Springer International Publishing AG; 2014. p. 153–85.
Bakand S, Hayes A, Dechsakulthorn F. Nanoparticles: a review of particle toxicology following inhalation exposure. Inhal Toxicol. 2012;24:125–35.
Schwarze PE, Ovrevik J, Låg M, Refsnes M, Nafstad P, Hetland RB, et al. Particulate matter properties and health effects: consistency of epidemiological and toxicological studies. Hum Exp Toxicol. 2006;25:559–79.
Maynard AD, Kuempel ED. Airborne nanostructured particles and occupational health. J Nanopart Res. 2005;7:587–614.
Maynard AD, Warheit DB, Philbert MA. The new toxicology of sophisticated materials: nanotoxicology and beyond. Toxicol Sci. 2011;120 Suppl 1:109–29.
Oyama T, Ishikawa Y, Hayashi M, Arihiro K, Horiguchi J. The effects of fixation, processing and evaluation criteria on immunohistochemical detection of hormone receptors in breast cancer. Breast Cancer. 2007;14:182–8.
Lawrie CH, Ballabio E, Soilleux E, Sington J, Hatton CSR, Dirnhofer S, et al. Inter- and intra-observational variability in immunohistochemistry: A multicentre analysis of diffuse large B-cell lymphoma staining. Histopathology. 2012;61:18–25.
Hsia CCW, Hyde DM, Ochs M, Weibel ER. An official research policy statement of the American Thoracic Society/European Respiratory Society: standards for quantitative assessment of lung structure. Am J Respir Crit Care Med. 2010;181:394–418.
Weibel ER. Stereological Methods: Theoretical Foundations, vol. 2. London: Academic; 1980.
Weibel ER, Gomez M. Architecture of the human lung. Science. 1962;137:577–85.
Weibel ER, Hsia CCW, Ochs M. How much is there really? Why stereology is essential in lung morphometry. J Appl Physiol. 2007;102:459–67.
Weibel ER. A retrospective of lung morphometry: from 1963 to present. Am J Physiol Lung Cell Mol Physiol. 2013;305:405–8.
Mühlfeld C, Ochs M. Quantitative microscopy of the lung: a problem-based approach. Part 2: stereological parameters and study designs in various diseases of the respiratory tract. Am J Physiol Lung Cell Mol Physiol. 2013;305:205–21.
Ochs M, Mühlfeld C. Quantitative microscopy of the lung: a problem-based approach. Part 1: basic principles of lung stereology. Am J Physiol Lung Cell Mol Physiol. 2013;305:15–22.
U.S. Department of Health and Human Service, Food and Drug Administration, Center for Drug Evaluation and Research: Guidance for Industry: Use of Histology in Biomarker Qualification Studies [http://www.fda.gov/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/default.htm].
Boyce JT, Boyce RW, Gundersen HJ. Choice of morphometric methods and consequences in the regulatory environment. Toxicol Pathol. 2010;38:1128–33.
Morfeld P, Bruch J, Levy L, Ngiewih Y, Chaudhuri I, Muranko HJ, et al. Translational toxicology in setting occupational exposure limits for dusts and hazard classification – a critical evaluation of a recent approach to translate dust overload findings from rats to humans. Part Fibre Toxicol. 2015;12:3.
Braakhuis HM, Park MVDZ, Gosens I, De Jong WH, Cassee FR. Physicochemical characteristics of nanomaterials that affect pulmonary inflammation. Part Fibre Toxicol. 2014;11:18.
Salvi S, Blomberg A, Rudell B, Kelly F, Sandström T, Holgate ST, et al. Acute inflammatory responses in the airways and peripheral blood after short-term exposure to diesel exhaust in healthy human volunteers. Am J Respir Crit Care Med. 1999;159:702–9.
Nemmar A, Hoylaerts MF, Hoet PHM, Vermylen J, Nemery B. Size effect of intratracheally instilled particles on pulmonary inflammation and vascular thrombosis. Toxicol Appl Pharmacol. 2003;186:38–45.
Braakhuis HM, Gosens I, Krystek P, Boere J, Cassee FR, Fokkens P, et al. Particle size dependent deposition and pulmonary inflammation after short-term inhalation of silver nanoparticles. Part Fibre Toxicol. 2014;11:49.
Baisch BL, Corson NM, Wade-Mercer P, Gelein R, Kennell AJ, Oberdörster G. Equivalent titanium dioxide nanoparticle deposition by intratracheal instillation and whole body inhalation: the effect of dose rate on acute respiratory tract inflammation. Part Fibre Toxicol. 2014;11:5.
Ma-Hock L, Strauss V, Treumann S, Küttler K, Wohlleben W, Hofmann T, et al. Comparative inhalation toxicity of multi-wall carbon nanotubes, graphene, graphite nanoplatelets and low surface carbon black. Part Fibre Toxicol. 2013;10:23.
Peeters PM, Eurlings IMJ, Perkins TN, Wouters EF, Schins RPF, Borm PJA, et al. Silica-induced NLRP3 inflammasome activation in vitro and in rat lungs. Part Fibre Toxicol. 2014;11:58.
Donaldson K, Brown GM, Brown DM, Bolton RE, Davis JM. Inflammation generating potential of long and short fibre amosite asbestos samples. Bri J Ind Med. 1989;46:271–6.
MacNee W, Donaldson K. Mechanism of lung injury caused by PM10 and ultrafine particles with special reference to COPD. Eur Respir J. 2003;21 Suppl 40:47–51.
Yoshida T, Tuder R. Pathobiology of cigarette smoke-induced chronic obstructive pulmonary disease. Physiol Rev. 2007;87:1047–82.
Cullinan P. Occupation and chronic obstructive pulmonary disease (COPD). Br Med Bull. 2012;104:143–61.
Kim JJ, Huen K, Adams S, Smorodinsky S, Hoats A, Malig B, et al. Residential traffic and children’s respiratory health. Env Heal Perspect. 2008;116:1274–9.
Young MT, Sandler DP, DeRoo LA, Vedal S, Kaufman JD, London SJ. Ambient air pollution exposure and incident adult asthma in a nationwide cohort of U.S. women. Am J Respir Crit Care Med. 2014;190:914–21.
Li N, Harkema JR, Lewandowski RP, Wang M, Bramble LA, Gookin GR, et al. Ambient ultrafine particles provide a strong adjuvant effect in the secondary immune response: implication for traffic-related asthma flares. Am J Physiol Lung Cell Mol Physiol. 2010;299:374–83.
Takahashi G, Tanaka H, Wakahara K, Nasu R, Hashimoto M, Miyoshi K, et al. Effect of diesel exhaust particles on house dust mite–induced airway eosinophilic inflammation and remodeling in mice. J Pharmacol Sci. 2010;112:192–202.
Brandenberger C, Rowley NL, Jackson-Humbles DN, Zhang Q, Bramble LA, Lewandowski RP, et al. Engineered silica nanoparticles act as adjuvants to enhance allergic airway disease in mice. Part Fibre Toxicol. 2013;10:26.
Ban M, Langonné I, Huguet N, Guichard Y, Goutet M. Iron oxide particles modulate the ovalbumin-induced Th2 immune response in mice. Toxicol Lett. 2013;216:31–9.
Taskar VS, Coultas DB. Is idiopathic pulmonary fibrosis an environmental disease? Proc Am Thorac Soc. 2006;3:293–8.
Cohen RAC, Patel A, Green FHY. Lung disease caused by exposure to coal mine and silica dust. Semin Respir Crit Care Med. 2008;29:651–61.
Chen T, Nie H, Gao X, Yang J, Pu J, Chen Z, et al. Epithelial-mesenchymal transition involved in pulmonary fibrosis induced by multi-walled carbon nanotubes via TGF-beta/Smad signaling pathway. Toxicol Lett. 2014;226:150–62.
Ma JY, Mercer RR, Barger M, Schwegler-Berry D, Scabilloni J, Ma JK, et al. Induction of pulmonary fibrosis by cerium oxide nanoparticles. Toxicol Appl Pharmacol. 2012;262:255–64.
Hecht SS. Tobacco smoke carcinogens and lung cancer. Cur Cancer Res. 2011;6:53–74.
Hodgson JT, Darnton A. The quantitative risks of mesothelioma and lung cancer in relation to asbestos exposure. Ann Occup Hyg. 2000;44:565–601.
Weill H, McDonald JC. Exposure to crystalline silica and risk of lung cancer: the epidemiological evidence. Thorax. 1996;51:97–102.
Li N, Wang M, Bramble LA, Schmitz DA, Schauer JJ, Sioutas C, et al. The adjuvant effect of ambient particulate matter is closely reflected by the particulate oxidant potential. Env Heal Perspect. 2009;117:1116–23.
Chen C, Chan C, Chen B, Cheng T, Leon Y. Effects of particulate air pollution and ozone on lung function in non-asthmatic children. Env Res. 2015;137:40–8.
Sun L, Liu C, Xu X, Ying Z, Maiseyeu A, Wang A, et al. Ambient fine particulate matter and ozone exposures induce inflammation in epicardial and perirenal adipose tissues in rats fed a high fructose diet. Part Fibre Toxicol. 2013;10:43.
De Haar C, Kool M, Hassing I, Bol M, Lambrecht BN, Pieters R. Lung dendritic cells are stimulated by ultrafine particles and play a key role in particle adjuvant activity. J Allergy Clin Immunol. 2008;121:1246–54.
Nygaard UC, Aase A, Løvik M. The allergy adjuvant effect of particles - genetic factors influence antibody and cytokine responses. BMC Immunol. 2005;6:11.
Hyde DM, Hamid Q, Irvin CG. Anatomy, pathology, and physiology of the tracheobronchial tree: emphasis on the distal airways. J Allergy Clin Immunol. 2009;124:72–7.
Hyde DM, Magliano DJ, Plopper CG. Morphometric assessment of pulmonary toxicity in the rodent lung. Toxicol Pathol. 1991;19:673–4.
Fehrenbach H. Morphological quantitation of emphysema: a debate. J Appl Physiol. 2006;100:1423–4.
Ochs M. Estimating structural alterations in animal models of lung emphysema. Is there a gold standard? Ann Anat. 2014;196:26–33.
Moore BBHC. Murine models of pulmonary fibrosis. Am J Physiol Lung Cell Mol Physiol. 2008;294:152–60.
Kuhn C. Pathology of pulmonary fibrosis. In: Phan S, Thrall R, editors. Pulmonary Fibrosis. New York: Marcel Dekker; 1995. p. 83.
Williams KJ, Robinson NE, Lim A, Brandenberger C, Maes R, Behan A, et al. Experimental induction of pulmonary fibrosis in horses with the gammaherpesvirus equine herpesvirus 5. PLoS One. 2013;8:1–15.
Mühlfeld C, Poland C, Duffin R, Brandenberger C, Murphy F, Rothen-Rutishauser B, et al. Differential effects of long and short carbon nanotubes on the gas-exchange region of the mouse lung. Nanotoxicology. 2012;6:867–79.
Birkelbach B, Lutz D, Ruppert C, Henneke I, Lopez-Rodriguez E, Günther A, et al. Linking progression of fibrotic lung remodeling and ultrastructural alterations of alveolar epithelial type II cells in the amiodarone mouse model. Am J Physiol Lung Cell Mol Physiol. 2015;309:63–75.
Bratu VA, Erpenbeck VJ, Fehrenbach A, Rausch T, Rittinghausen S, Krug N, et al. Cell counting in human endobronchial biopsies - Disagreement of 2D versus 3D morphometry. PLoS One. 2014;9:1–12.
Schneider JP, Ochs M. Alterations of mouse lung tissue dimensions during processing for morphometry: a comparison of methods. Am J Physiol Lung Cell Mol Physiol. 2014;306:341–50.
Mühlfeld C, Rothen-Rutishauser B, Vanhecke D, Blank F, Gehr P, Ochs M. Visualization and quantitative analysis of nanoparticles in the respiratory tract by transmission electron microscopy. Part Fibre Toxicol. 2007;4:11.
Scherle W. A simple method for volumetry of organs in quantitative stereology. Mikroskopie. 1970;26:57–60.
Michel R, Cruz-Orive L. Application of the Cavalieri principle and vertical sections method to lung: estimation of volume and pleural surface area. J Microsc. 1988;150:117–36.
Gundersen H, Jensen E. The efficiency of systematic sampling in stereology and its prediction. J Microsc. 1987;147:229–63.
Mayhew TM. Taking tissue samples from the placenta: An illustration of principles and strategies. Placenta. 2008;29:1–14.
Howard C, Reed M. Unbiased Stereology: Three-Dimensional Measurement in Microscopy. 2nd ed. Abingdon: BIOS Scientific Publishers; 2005.
Nyengaard JR, Gundersen HJ. The isector: a simple and direct method for generating isotropic, uniform random sections from small specimens. J Microsc. 1991;165:427–31.
Mattfeldt T, Mall G, Gharehbaghi H, Möller P. Estimation of surface area and length with the orientator. J Microsc. 1990;159:301–17.
Nyengaard JR, Gundersen HJG. Sampling for stereology in lungs. Eur Respir Rev. 2006;15:107–14.
Sterio D. The unbiased estimation of number and sizes of arbitrary particles using the disector. J Microsc. 1984;134:127–36.
Tschanz SA, Burri PH, Weibel ER. A simple tool for stereological assessment of digital images: the STEPanizer. J Microsc. 2011;243:47–59.
Gundersen H, Osterby R. Optimizing sampling efficiency of stereological studies in biology: or “do more less well!”. J Microsc. 1981;121:65–73.
Gundersen HJG, Jensen EBV, Kiêu K, Nielsen J. The efficiency of systematic sampling in stereology - Reconsidered. J Microsc. 1999;193:199–211.
Möller W, Kreyling WG, Schmid O, Semmler-Behnke M, Schulz H. Deposition, retention and clearance, and translocation of inhaled fine and nano-sized particles in the respiratory tract. In: Gehr P, Mühlfeld C, Rothen-Ruthishauser B, Blank F, editors. Particle-Lung Interactions. 2nd ed. New York: Informa Healthcare USA; 2010. p. 79–107.
Brody AR, Roe M. Deposition pattern of inorganic particles at the alveolar level in the lungs of rats and mice. Am Rev Respir Dis. 1983;128:724–9.
Chang LY, Overby LH, Brody AR, Crapo JD. Progressive lung cell reactions and extracellular matrix production after a brief exposure to asbestos. Am J Pathol. 1988;131:156–70.
Gardi JE, Nyengaard JR, Gundersen HJG. The proportionator: Unbiased stereological estimation using biased automatic image analysis and non-uniform probability proportional to size sampling. Comput Biol Med. 2008;38:313–28.
Keller KK, Andersen IT, Andersen JB, Hahn U, Stengaard-Pedersen K, Hauge EM, et al. Improving efficiency in stereology: A study applying the proportionator and the autodisector on virtual slides. J Microsc. 2013;251:68–76.
Gardi JE, Nyengaard JR, Gundersen HJG. Automatic sampling for unbiased and efficient stereological estimation using the proportionator in biological studies. J Microsc. 2008;230:108–20.
Schmiedl A, Lempa T, Hoymann HG, Rittinghausen S, Popa D, Tschernig T, et al. Elastase-induced lung emphysema in rats is not reduced by hematopoietic growth factors when applied preventionally. Virchows Arch. 2008;452:675–88.
Ochs M, Knudsen L, Allen L, Stumbaugh A, Levitt S, Nyengaard JR, et al. GM-CSF mediates alveolar epithelial type II cell changes, but not emphysema-like pathology, in SP-D-deficient mice. Am J Physiol Lung Cell Mol Physiol. 2004;287:1333–41.
Plopper CG, Hyde DM. The non-human primate as a model for studying COPD and asthma. Pulm Pharmacol Ther. 2008;21:755–66.
Brandenberger C, Li N, Jackson-Humbles DN, Rockwell CE, Wagner JG, Harkema JR. Enhanced allergic airway disease in old mice is associated with a Th17 response. Clin Exp Allergy. 2014;44:1282–92.
Winkler C, Bahlmann O, Viereck J, Knudsen L, Wedekind D, Hoymann HG, et al. Impact of a Met(11)Thr single nucleotide polymorphism of surfactant protein D on allergic airway inflammation in a murine asthma model. Exp Lung Res. 2014;40:154–63.
Boyce RW, Dorph-Petersen K-A, Lyck L, Gundersen HJG. Design-based stereology: introduction to basic concepts and practical approaches for estimation of cell number. Toxicol Pathol. 2010;38:1011–25.
Howell K, Hopkins N, Mcloughlin P. Combined confocal microscopy and stereology: a highly efficient and unbiased approach to quantitative structural measurement in tissues. Exp Physiol. 2002;87:747–56.
Vanhecke D, Studer D, Ochs M. Stereology meets electron tomography: towards quantitative 3D electron microscopy. J Struct Biol. 2007;159:443–50.
Kubínová L, Janáček J. Confocal microscopy and stereology: Estimating volume, number, surface area and length by virtual test probes applied to three-dimensional images. Microsc Res Tech. 2001;53:425–35.
Gundersen HJG. Notes on the estimation of the numerical density of arbitrary profiles: the edge effect. J Microsc. 1977;111:219–23.
Churg A, Cosio M, Wright JL. Mechanisms of cigarette smoke-induced COPD: insights from animal models. Am J Physiol Lung Cell Mol Physiol. 2008;294:612–31.
Ochs M, Nyengaard JR, Jung A, Knudsen L, Voigt M, Wahlers T, et al. The number of alveoli in the human lung. Am J Respir Crit Care Med. 2004;169:120–4.
Hyde DM, Tyler NK, Putney LF, Singh P, Gundersen HJG. Total number and mean size of alveoli in mammalian lung estimated using fractionator sampling and unbiased estimates of the Euler characteristic of alveolar openings. Anat Rec A: Discov Mol Cell Evol Biol. 2004;277:216–26.
Gundersen HJG, Boyce RW, Odgaard A. The Conneulor: unbiased estimation of connectivity using physical disectors under projection. Bone. 1993;14:217–22.
Brandenberger C, Mühlfeld C, Ali Z, Lenz A-G, Schmid O, Parak WJ, et al. Quantitative evaluation of cellular uptake and trafficking of plain and polyethylene glycol-coated gold nanoparticles. Small. 2010;6:1669–78.
Rothen-Rutishauser B, Kuhn DA, Ali Z, Gasser M, Amin F, Parak WJ, et al. Quantification of gold nanoparticle cell uptake under controlled biological conditions and adequate resolution. Nanomedicine (London). 2014;9:607–21.
Brandenberger C, Rothen-Rutishauser B, Blank F, Gehr P, Mühlfeld C. Particles induce apical plasma membrane enlargement in epithelial lung cell line depending on particle surface area dose. Respir Res. 2009;10:22.
Mühlfeld C, Mayhew TM, Gehr P, Rothen-Rutishauser B. A novel quantitative method for analyzing the distributions of nanoparticles between different tissue and intracellular compartments. J Aerosol Med. 2007;20:395–407.
Brandenberger C, Clift MJD, Vanhecke D, Mühlfeld C, Stone V, Gehr P, et al. Intracellular imaging of nanoparticles: is it an elemental mistake to believe what you see? Part Fibre Toxicol. 2010;7:15.
Hyde DM, Tyler NK, Plopper CG. Morphometry of the respiratory tract: avoiding the sampling, size, orientation, and reference traps. Toxicol Pathol. 2007;35:41–8.
Braendgaard H, Gundersen HJG. The impact of recent stereological advances on quantitative studies of the nervous system. J Neurosci Methods. 1986;18:39–78.
Dorph-Petersen KA, Nyengaard JR, Gundersen HJG. Tissue shrinkage and unbiased stereological estimation of particle number and size. J Microsc. 2001;204:232–46.
Jeffery P, Holgate S, Wenzel S. Methods for the assessment of endobronchial biopsies in clinical research: Application to studies of pathogenesis and the effects of treatment. Am J Respir Crit Care Med. 2003;168:1–17.
Woodruff PG, Dolganov GM, Ferrando RE, Donnelly S, Hays SR, Solberg OD, et al. Hyperplasia of smooth muscle in mild to moderate asthma without changes in cell size or gene expression. Am J Respir Crit Care Med. 2004;169:1001–6.
Regamey N, Ochs M, Hilliard TN, Mühlfeld C, Cornish N, Fleming L, et al. Increased airway smooth muscle mass in children with asthma, cystic fibrosis, and non-cystic fibrosis bronchiectasis. Am J Respir Crit Care Med. 2008;177:837–43.
The authors’ work is supported by the Bundesministerium für Bildung und Forschung (BMBF) via the German Center for Lung Research (DZL) and by the Deutsche Forschungsgemeinschaft (DFG) via the Cluster of Excellence REBIRTH. We would like to thank Sheila Fryk for English proofreading and Dr. Jack R. Harkema for providing the BrdU positive lung histology slide.
The authors declare that they have no competing interests
All authors contributed to the design and concept of this article. CB drafted the manuscript. MO and CM critically revised the manuscript. All authors read and approved the final manuscript.
About this article
Cite this article
Brandenberger, C., Ochs, M. & Mühlfeld, C. Assessing particle and fiber toxicology in the respiratory system: the stereology toolbox. Part Fibre Toxicol 12, 35 (2015) doi:10.1186/s12989-015-0110-8
- Chronic Obstructive Pulmonary Disease
- Airway Remodel
- Reference Space
- Allergic Airway Disease
- Particle Exposure